Join our mailing list to find out more ways to make and save money with little time and effort.

10 Cheap Home Upgrades That Are Easy & Efficient

Some of these links may be affiliate links and we may receive compensation when you sign-up for offers. See our disclosure policy. All information on this site is for educational and informational purposes only.

cheap home upgradesCheap home upgrades can also be simple and easy to do.

So if you are tired of the way things look around the house, then why not make it look a little nicer while also increasing its potential value.

In this article, we will take a look at the top 10 cheap home upgrades that are both simple and practical.

10. Install shelving systems so you can have more storage.

If you need a cheap home upgrade to get rid of the vast amount of stuff cluttering up your closet, then maybe you should think about installing closet organizers.

This easy tutorial will assist you with the installation process for closet organizer systems and show you how to install shelves.

However, you should be aware that different manufacturers produce different kinds of systems, and their components are not always compatible.

In order to be on the safe side, stick with one brand for each area when you are in the initial stages of planning.

Here are the tools you will need:

  • Impact driver
  • Power drill
  • Tape measure
  • Drywall screws
  • Carpenter square
  • Screwdriver
  • Twist drill bit
  • Hollow & drywall anchors
  • Wire closet systems
  • Standard level

Marking the wall

The first step of this cheap home upgrade involves measuring from the floor up to the height of the first shelf, then marking the wall. Using a carpenter’s level, mark a horizontal line all around the closet at this height for reference.

Mounting the Shelf

Mount the shelf by attaching the mounting clips with screws that are driven into the wall studs. Make sure that you refer to the directions in order to get the proper spacing of the mounting clips.

Secondly, use hollow-wall anchors to fasten the clips between each of the wall studs. Finally, attach diagonal shelf supports where they are needed. That’s it! Just keep adding shelves until you have enough storage space for your needs.

9. Upgrade your bathroom

There are many things you can do so that the bathrooms in your house are more comfortable and pleasant. In addition, these cheap home upgrades will save you money because they will allow you save on your water and laundry bills.

Adding a robe hook

You’d be surprised at how many bathrooms don’t have robe hooks. They are simple devices that will add an enormous amount of convenience to the bathrooms in your home. In addition, they are very cheap and easy to install.

In order to install one in your bathroom, screw a plate into the wall and then place the robe hook over the top of the plate. After that, secure the robe hook in place. The entire process only takes a couple of minutes or so and will give everyone a place to hang their robe.

Installing a hand towel holder

If you don’t have a hand towel holder, then you need to get one. Not only will the holder itself improve the aesthetic aspects of your bathroom, but the beautiful features of your new hand towels will also give the area a more pleasant ambience.

Once again, all you need to do is screw a plate into the wall, and then place your holder on top of the plate and secure it in place. This only takes a few minutes and really livens up the place.

Adding a towel bar

Towel bars provide a place to hang your towels and may also function as grab bars so that everyone will have more safety when stepping in or out of your shower.

To install a towel bar, screw the plates into the studs. Put the bar in place and secure it. If you are unsure about any part of this simple process, just take a quick look at the instructions that come with the bar you purchased. This is true for any of the cheap home upgrades you wish to perform by yourself.

Installing a shower head

You might be craving for a more comfortable shower experience in your home. If that is the case, then why not consider getting a new shower head. There are many designs available, and they are cheap and easy to install.

First of all, just remove your old shower head. Usually, they will just screw right off. After that, put a little bit of teflon tape around the threads of the new head pipe and screw it in place. Next, use caulk around the base of the pipe and put the faceplate on top.

The process may take up to an hour, In addition, you will definitely want to use the manufacturer’s instructions that come with the new shower head you have purchased in order to make sure you have all of the details correct.

Using professionals

If you need any complex upgrades, like new faucets or pipes, then you need hire the services of trained professionals. Do NOT attempt these activities on your own. Remember that safety comes first, and working with plumbing can be extremely dangerous.

You should also realize that you may not save any money when trying to do more complicated upgrades by yourself. In fact, such attempts might be even more costly than you imagined.

For example, let’s suppose you make a wrong move and are standing in a foot of water five seconds later. You will probably have to call an expensive plumber to fix the damage. You will also have the additional expenses of replacing everything that has been water damaged.

So be safe and add cheap home upgrades that are easy to install so that you can raise the value of your home without having to spend a fortune.

8. Putting new handles on your drawers and cabinets

New hardware will definitely improve the look of your kitchen. In addition, these types of cheap home upgrades will make your entire kitchen feel more modern and up to date.

Making the correct measurements

First of all, take a few measurements of the existing cabinets and hardware so you can shop for new hardware.

For single-hole hardware, you will not have to worry about measurements. Most knobs come with a one inch screw in order to accommodate three-quarter inch drawer fronts. With drawer fronts that are thicker, you will need knobs with a longer screw.

For hardware with two holes like a drawer pull, you will need to select hardware items that have identical center to center distances like your original hardware. You might also want to measure the length of your original drawer pulls so you have an additional point of reference.

Shopping for new hardware

There are tons of options to choose from when shopping for new hardware. You may shop at a local store for these items or buy new kitchen hardware online. Just make sure you know how many knobs and pulls you will need when buying the parts for this cheap home upgrade.

You will also want to search for the correct style and color. If you need a modern style then use the appropriate keywords to aid your search. Likewise, if you want something more rustic, then use the correct terms in order to find what you want.

Installing the hardware

First of all, remove the existing hardware. You will probably need a screwdriver to do this. After that, you will need to screw in the new hardware into the proper places.

You will be amazed at the results you achieve with this process. In addition, if this operation goes well, you may also want to consider changing the hardware on your dressers and nightstands. Good luck!

7. Add a wireless doorbell to your home.

Going wireless is usually the best choice out of all of the cheap home upgrades if your home does not have a doorbell yet. This option is also a great choice if you like the idea of having a portable chime box that you can place in any room of your house.

Chime units usually plug directly into standard indoor outlets. In addition, certain types of wireless doorbells come with several chime boxes that you can put in multiple rooms.

Shopping for wireless doorbells

First, you need to check the packaging to see what the wireless signal distance is. Generally, it is somewhere between 600 and 1,300 feet. You need this information so you can be sure that the chime box you purchase will sound if it is set in a back room.

Wireless doorbells and their chime boxes come in many shapes and sizes. The more inexpensive options begin at $15.

Installing a wireless doorbell

First, attach the plate that holds the button to the front door casing or siding. After that, snap the button into place. Many of these units are of the snap-in, snap-out variety in order to make battery replacement more simple. Last of all, plug the chime box into a power outlet.

That’s it! You’re done and ready to have lots of friends and visitors visit your home to check out your latest cheap home upgrade.

To either remove or replace an existing wired doorbell, you should hire a professional and not attempt to do this by yourself. This is because the process is somewhat complex and can be extremely dangerous if you do not know what you are doing.

6. Update recessed lighting with magnetic shades.

There are many kinds of magnetic trims and shades for pot lights and older style can lights.

These magnetic shades snap onto the metal frame of most recessed lights. Adding these items are some of the easiest cheap home upgrades you can perform quickly without hardly any effort at all.

Shopping for covers and shades

Before shopping for the right style, shape, color, and design. All you need to do is measure the exterior diameter of the recessed lighting you would like to spruce up.

These shades and covers can be installed in seconds and are easy to remove. You can also move them around your house every once in a while if you want to. This cheap home upgrade allows for a tremendous amount of variety with your home’s design.

Installing magnetic covers and shades

The round or square magnetic silicone covers and lightweight shades click onto the metal frame. There’s no rewiring required, no changing parts, and no mess. And when you leave, you can take them with you.

Magnetic shades will instantly transform the rooms in your house into amazing places filled with new shapes of beauty and color. You should also know that they are not only easy to install and move around, but they are also affordable. Some of the less expensive brands begin $15.

5. Improve rusted iron railings.

These items are classics that look good with almost every home. However, if you have iron railings, gates, or patio furniture that are flaking and peeling, then here is what you need to know so you can repaint them.

It’s all about the preparation, and that is especially true when painting iron railings. Because the time you spend removing the old paint will pay off in the results, you should take your time and do the job right. This is one of the cheap home upgrades that may take a little more time, but it is worth it.

Removing the old paint

Using a wire brush, get the surface down to bare metal. Make sure you get into all the nooks and crannies.

You can also use a rust converter, which is a chemical that can be applied to rusted surfaces to create a surface that is ready to be painted.

Once you’re done removing the old paint, you should wipe the metal with a damp cloth and hose it down so you can be sure that all of the little particles are removed. Finally, allow it to dry thoroughly.

Shopping for the new paint

For this cheap home upgrade to get the best results, you should get some pictures of the railing and its surroundings, so you can find a matching color. In addition, you should make sure that the paints you are looking at are designed for metal.

Painting the iron

When you are ready to begin painting, use spray paint and cover the surfaces and crevices with at least two or three separate coats. You’ll get great results, and many more years of good-looking wrought iron.

4. Put a metal kick plate on your front door

Kick plates are usually installed on the lower sections of doors, so they will be protected from damage.

In addition, they have aesthetic appeal and will add a stylistic flare to the appearance of the front of your home. This is one of the more simplistic types of the cheap home upgrades that you should seriously consider.

A kick plate that matches the other designs and colors on your door makes an attractive addition to your home. New kick plates are usually attached by screws.

Measuring for your kick plate

The width of the kick plate should be two inches shorter than the dimensions of the door when it is closed. You need to allow room at the bottom of your door so that the kick plate doesn’t come into contact with your sill. In addition, leave the same amount of space from the bottom as on the sides.

However, you will probably not need these measurements because there are two standard sizes that will work with most residential doors. They are 8 by 34 inches and 6 by 30 inches. The former size is for front doors and the latter is for the other doors in a typical home.

Mounting your kick plate

After getting the kick plate in place and aligned, you can place screws into holes and screw them in. Now you’re done! The front of your home looks better, and you can have all of your friends and family take turns kicking the base of your front door.

3. Add peel-and-stick wallpaper.

The best thing about peel-and-stick wallpaper is that you can use it in many locations. However, the best part is that it is removable and can be used again. This option is a cheap home upgrade that can be altered at a later time for variety or convenience.

Gathering the tools

When you are getting ready to apply your wallpaper, you will need these tools:

  • Razor knife
  • Scissors
  • Pencil
  • Wall cleaner
  • Tape measure
  • Level
  • Straight edge
  • Plastic smoother

Cleaning the surfaces

The first step with this cheap home upgrade involves cleaning all surfaces. This is a very important step because the wallpaper will not cling to textured surfaces. After that, measure your walls by starting on the left side and measuring out from the corner. Mark the width of the paper about twenty inches.

Next, put your level on the mark and draw a vertical line as a guide for your first strip. You need to allow for another inch so you can trim the top and bottom properly.

Cutting the wallpaper

Cut strips to fit the height of the wall. While doing this, make sure you align any designs from strip to strip. It might be a good idea for you to number the back of every strip as you go, so you can keep your design in the right order.

Peeling the backing off of your wallpaper

Next, you need to peel about a foot of the backing off of the paper. After that, apply the paper to the very top of the wall while allowing some excess to overlap the ceiling. Next, align the right side of each strip to your mark and press the edge next to the wall along the mark.

Positioning wallpaper to the top of the wall

As you work from top to bottom, pull the backing away as you press your paper to the wall. For better results, you should get one person to guide the paper at the top and alongside the seam, while another individual holds the other edge away from the wall. Let the seams line up neatly.

Smoothing the wallpaper

While using a plastic smoother, work your way down each strip in a motion that goes back and forth. Smooth the material to the wall and push out all of the bubbles of air. Next, trim off the excess material at the ceiling and baseboard, using a straightedge and a razor knife.

Keep doing this until you have covered the areas that you want to have covered. You will be surprised at how so little effort can yield such big results.

2. Adding adhesive mirrored tiles

You can use beveled mirror tiles to enlarge the visual appearance of your house’s rooms. These kinds of tiles can be used to make large mirrors on your walls.

You can get these tiles backed with gold, brass, or silver. It is one of the cheap home upgrades that drastically improves the ambience of your home.

Here is a list of the things you will need:

  • Mirror tile adhesive primer
  • Double-sided mirror tape
  • Roller paint brush
  • Mirror tile adhesive
  • Trowel
  • Sponge
  • Measuring tape
  • Carpenter’s level
  • Sandpaper
  • Paper towels

Cleaning the walls

First, clean the walls with warm water and soap. After that, sand the surface of the walls. Next, set the tiles on a flat surface and arrange them in the pattern that you are going to use.

Applying the mirror adhesive primer/sealer

Using a carpenter’s level, measure the width and length of the design. Next, transfer these measurements onto the wall. Now you need to apply a layer of mirror adhesive primer/sealer to the wall with a roller brush and wait for the primer to dry. This usually takes about forty minutes.

Applying the mirror tile adhesive

After that, apply a layer of mirror tile adhesive to the wall with a trowel according to the instructions on the package. Next, you need to wait for the required setting time before you install the tile.

Add the double-sided mirror tape-squares

Next, you need to add four double-sided mirror tape squares for each foot of tile. Peel the plastic cover off of one side of the tape and put it on the back of the glass. The tape makes sure that the tile stays on the wall while the adhesive is setting.

Place the tiles onto the adhesive

The next thing you need to do is remove the plastic cover from the top of the double-sided tape on the tile. Hold the tile near the top corner of the installation area. Place the back of the tile onto the adhesive. Keep adding tiles and then wipe all of the excess adhesive from the front surface of the tiles.

You will also want to consult the instructions with the products you have bought so that you will understand all of the details. Once you are done, you will be amazed at the illusion of extra space that this cheap home upgrade provides.

1. Fixing damage on showers and tubs

Okay! It appears that we have a winner! Coming in as the top of the list for cheap home upgrades are the unsightly cracks in your showers and tubs. These are HUGE problems because most people will judge the overall cleanliness of your home by how good your bathtubs and showers look.

If you have cracks and crevices in your shower or tub, your entire bathroom will look bad. Therefore, you need to fix these things immediately. Fortunately, the process that corrects this horrendous situation is one of the cheap home upgrades that does not require large amounts of time and complexity.

Here is what you need:

Cleaning the area that needs repair

To start off with, you need to clean the damaged area with a non-abrasive cleanser. After that, rinse the area completely. Any residue that is not removed will compromise your fix and shorten its lifespan.

Combining the resin with the hardener and coloring agent and then spreading it

In a container, combine the resin with the hardener and coloring agent. Make sure you follow the package directions. Spread this mixture over the damaged spot and create a smooth surface. Let the repair harden and then sand until smooth.

Once you have taken care of these issues, your bathroom can get back to looking normal, so you can focus on fun things like scented soaps and potpourri.

Final thoughts about cheap home upgrades

In conclusion, by having fun and making these cheap home upgrades, you will increase the value of your home while also increasing the amount of pleasure you will get from it.

So what are you waiting for? Get busy and start upgrading!

Earn Fee Cash Online: The Survey Junkie survey site is a FREE survey site that pays you to take surveys online. There's absolutely no cost to join, and payouts can be made to either PayPal or for a gift card of your choosing. The best part? Some people are earning at a rate of up to $15 - $20 per hour. It's 100% free to join. We've partnered with Survey Junkie to give you a 25-point sign-up bonus when you register using our link and complete your initial profile information.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.